550kg Knott Avonride Extended trailer suspension units

Part No. SU 057-100

Maximum capacity per pair 550kg

A Pair of Avon ride unbraked Suspension units with 100" PCD hubs.

These have an extended Stub axle and will take most cast trailer hubs.

Fits Standard 6 hole suspension plate (SP05)

These units are suitable for flotation wheels most offset wheels and centre nave wheels although the extended stub axle is not nessacery for most canter nave trailer wheels.

These are suitable for reclaimed wheels from some cars with 100mm PCD including most Vauxhall, Rover, Citroen and Peogoet.

Please note: we have found a lot of reclaimed car wheels only have a 57mm centre hole although the PCD is correct the centre boss on these hubs is 59mm this can be overcome by opening out the centre hole.

Please check measurements.

These are not suitable for using with a 20.5X8.0-10 flotation wheel or a wheel with an offset and a wide tyre as the stub axle will not allow the wheel to clear the side of the trailer.

These come with bearings split pins and washers but are not assembled.

For technical specification please see diagrams below.

Please note all dimensions are measured and there could be slight discrepancies.

Please note all weight ratings are as a pair and they are only sold as pairs.

If you have a multi axle trailer do not mix suspension units as different manufactures have different ride heights and travel. This may cause axles to be overloaded.

Relevant links

To help calculate your postage this weighs 17.4kg

To calculate the postage you would be paying for your item/s we have pages that give postage price for your area in weight bands. these can be found using the links below.

For more suspension and parts use the links listed below.